Hi. I can map the axles without problems (have to use invert, though), but only throttle pedal actually works. I can rev the car on the start line (and use the shifter to change gears), but the car wont move, because the clutch is always on (and also the brakes). Have tried with and without automatic clutch and with the shifter and without it, same results. Here's the config: Win10 (latest updates) G29 TH-8A shifter Anyone else having this?
Did you try to toggle the handbrake? It's on by default at start. Try to press it and check if the car moves Inviato dal mio Lenovo P2a42 utilizzando Tapatalk
Mine clutch isnt recognized..then after restart it recognizes it but then no...and now the only way to have the car moving around is to have it on auto clutch...Any help?
The handbrake is on by default, you need to pull it , to release the car. If brakes are on 100%, reverse them in game, i had to do that with the wheel. You need to have the Clutch pressed in before selecting gear and make sure the Revs are high. Just drive as normal. Clutch in , Change gear , Clutch out ... Rinse and repeat.
Solito problema, la prima volta che il gioco ha preso la configurazione dei comandi, ma alla sessione successiva o dopo un riavvio del gioco la macchina non si muove, non riconosce più i nuovi comandi assegnati e non ha la possibilità di reimpostare. Ho un G27 e i driver sono aggiornati. Attualmente non posso più giocare a causa di questo problema. ho bisogno di aiuto
I had already reversed. The problem is when I leave the first race and access another losing their functionality. I tried to change them again but no outcome. It seems that the car at the beginning of the race no longer recognizes the assigned commands, for example if gear change I do not see it more on speedometer. Sry for my english
